André, H. (2018). Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products, . Licentiate, Chalmers University of Technology.

André, H., M. Ljunggren Söderman and A.-M. Tillman (2016). Circular Economy as a Means to Efficient Use of Scarce Metals? Electronics Goes Green 2016. Berlin, Germany.

Bocken, N., L. Strupeit, K. Whalen and J. Nußholz (2019). “A Review and Evaluation of Circular Business Model Innovation Tools.” Sustainability 11(8): 2210.

Brambila-Macias, S. (2018). Early stages of designing resource-efficient offerings : An initial view of their analysis and evaluation. 1801 Licentiate thesis, comprehensive summary, Linköping University Electronic Press.

Brambila-Macias, S. A., L. Dahllöf, K. Eriksson and T. Sakao (2017). Development of an environmental evaluation tool in the transport sector and its impact on decision-making in the early stages of design. 8th International Conference on Life Cycle Management. Luxemburg.

Brambila-Macias, S. A., T. Sakao and C. Kowalkowski (2016). Interdisciplinary Insights Found for Product/Service System Design. 14th International Design Conference (DESIGN). Dubrovnik, Croatia, The Design Society: 137-144.

Brambila-Macias, S. A., T. Sakao and C. Kowalkowski (2018). “Bridging the gap between engineering design and marketing: insights for research and practice in product/service system design.” Design Science 4: e7.

Böckin, D. (2018). Learning from assessments of resource efficiency measures and their impact on resource use and the environment – Based on a case of additive manufacturing and a review of assessment studies, no L2018:101. Licentiate, Chalmers University of Technology.

Böckin, D., S. Willskytt, A.-M. Tillman and M. Ljunggren Söderman (2016). What makes solutions within the manufacturing industry resource efficient? EcoBalance 2016, October 3-6. Kyoto, Japan.

Casper, R. and E. Sundin (2018). “Addressing Today’s challenges in automotive remanufacturing.” Journal of Remanufacturing 8(3): 93-102.

Casper, R. and E. Sundin (2018). “Reverse Logistic Transportation and Packaging Concepts in Automotive Remanufacturing.” Procedia Manufacturing 25: 154-160.

Crafoord, K., C. Dalhammar and L. Milios (2018). “The use of public procurement to incentivize longer lifetime and remanufacturing of computers.” Procedia CIRP 73: 137-141.

Dalhammar, C. (2015). “The Application of ‘life cycle thinking’ in European environmental law: theory and practice.” Journal for European Environmental & Planning Law 12(2): 97-127.

Dalhammar, C. (2015). “The Setting of Progressive Energy Efficiency Performance Standards for Products through the Ecodesign Directive.” Nordic Environmental Law Journal 2015(1): 21-41.

Dalhammar, C. (2016). “Industry attitudes towards ecodesign standards for improved resource efficiency.” Journal of Cleaner Production 123: 155-166.

Dalhammar, C. (2017). Rethinking the Ecodesign Policy Mix in Europe. Sustainability Through Innovation in Product Life Cycle Design. EcoProduction (Environmental Issues in Logistics and Manufacturing). M. Matsumoto, K. Masui, S. Fukushige and S. Kondoh, Springer, Singapore.

Dalhammar, C. and L. Milios (2016). Policies to support reconditioning and reuse of ICT. 2016 Electronics Goes Green 2016+ (EGG).

Desai, A., M. Lindahl and M. Widgren (2017). Actors and System Maps: A Methodology for Developing Product/Service Systems. Sustainability Through Innovation in Product Life Cycle Design. EcoProduction (Environmental Issues in Logistics and Manufacturing). M. Matsumoto, K. Masui, S. Fukushige and S. Kondoh, Springer, Singapore.

Falconi, V., E. Sundin, M. Colledani and G. Copani (2017). Key success factors for implementing Upgrading Remanufacturing. 3rd International Conference on Remanufacturing (ICoR-17). Linköping, Sweden: pp 33-46.

Fargnoli, M. and T. Sakao (2017). “Uncovering differences and similarities among quality function deployment-based methods in Design for X – Benchmarking in different domains.” Quality Engineering 29(4): 690-712.

Fargnoli, M., N. Haber and T. Sakao (2018). “PSS modularisation – a customer-driven integrated approach.” International Journal of Production Research: 1-17.

Faure, M. G. and C. Dalhammar (2018). Principles for the Design of a Policy Framework to Address Product Life Cycle Impacts. Preventing Environmental Damage from Products: An Analysis of the Policy and Regulatory Framework in Europe. C. Dalhammar, E. Maitre-Ekern and H. C. Bugge. Cambridge, Cambridge University Press: 57-86.

Gåvertsson, I., L. Milios and C. Dalhammar (2018). “Quality Labelling for Re-used ICT Equipment to Support Consumer Choice in the Circular Economy.” Journal of Consumer Policy.

Haber, N., M. Fargnoli and T. Sakao (2018). “Integrating QFD for product-service systems with the Kano model and fuzzy AHP.” Total Quality Management & Business Excellence: 1-26.

Hjelm, O. and M. Lindahl (2016). “Roles of Academia in Supporting Eco-design in Small Companies for Better Environmental and Economic Performance.” Procedia CIRP 50: 745-750.

Kimita, K., T. Sakao and Y. Shimomura: (2018). “A Failure Analysis Method for Highly-Reliable Product-Service System Design.” Research in Engineering Design, Springer 29(2): pp 143–160.

Kurilova-Palisaitiene, J. (2015). Lean Remanufacturing: addressing system challenges. Eco-Design-15, December 2-4, Tokyo, Japan.

Kurilova-Palisaitiene, J. and E. Sundin (2017). Remanufacturing lead time reduction through a Just-in-time Lean strategy – a case study on Laptops. 3rd International Conference on Remanufacturing (ICoR-17). Linköping, Sweden: pp 47-56.

Kurilova-Palisaitiene, J., E. Sundin and B. Poksinska (2018). “Remanufacturing challenges and possible lean improvements.” Journal of Cleaner Production 172: 3225-3236.

Lindahl, M. (2018). Key issues when designing solutions for a circular economy. Designing for the Circular Economy. M. Charter, Routledge: 113-122.

Lindkvist Haziri, L., E. Sundin and T. Sakao (2019). “Feedback from Remanufacturing: Its Unexploited Potential to Improve Future Product Design.” Sustainability 11.

Lindkvist, L. and E. Sundin (2015). Assessing barriers for available life-cycle information feedback transfer to product design. ICoR- 2nd International Conference on Remanufacturing, Amsterdam, Netherlands, 14-16 June 2015.

Lindkvist, L. and E. Sundin (2016). A stepwise method towards products adapted for remanufacturing. INTERNATIONAL DESIGN CONFERENCE – DESIGN 2016, Dubrovnik – Croatia, May 16 – 19, 2016. S. M. P. N. B. N. S. S. Marjanovic Dorian, The Design Society: 321-330.

Lindkvist, L., N. Alonso Movilla, E. Sundin and P. Zwolinski (2016). Investigating types of information from WEEE take-back systems in order to promote Design for Recovery. EcoDesign 2015, 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, 2-4 December 2015. Matsumoto, M. , K. Masui, S. Fukushige and S. Kondoh, Springer.

López, A. M., F. Musonda, T. Sakao and N. Kebir (2017). “Lessons Learnt from Designing PSS for Base of Pyramid.” Procedia CIRP 61: 623-628.

Maitre‐Ekern, E. and C. Dalhammar (2016). “Regulating Planned Obsolescence – A Review of Legal Approaches to Increase Product Durability and Reparability in Europe.” Review of European, Comparative & International Environmental Law 25(3): 378-394.

Maitre-Ekern, E. and C. Dalhammar (2018). Consumers in the Circular Economy: A Scandinavian Perspective. Consumer Protection in a Circular Economy. Leuven.

Matschewsky, J. (2016). What’s in it for the Provider? : A Lifecycle-Focused Approach towards Designing for Value in Product-Service Systems. 1757 Licentiate thesis, Linköping University Electronic Press.

Matschewsky, J., M. L. Kambanou and T. Sakao (2018). “Designing and providing integrated product-service systems – challenges, opportunities and solutions resulting from prescriptive approaches in two industrial companies.” International Journal of Production Research 56(6): 2150-2168.

Milios, L. (2017). The ‘circular’building materials challenge: a case-based policy approach. 18th European Roundtable on Sustainable Consumption and Production.

Milios, L. (2018). “Advancing to a Circular Economy: three essential ingredients for a comprehensive policy mix.” Sustainability Science 13(3): 861-878.

Milios, L. and K. Whalen (2018). Sailing towards a circular economy: potential for increased reuse and remanufacturing of ship components. 2018 International Conference on Resource Sustainability. Beijing.

Milios, L., A. E. Davani and Y. Yu (2018). “Sustainability Impact Assessment of Increased Plastic Recycling and Future Pathways of Plastic Waste Management in Sweden.” Recycling 3(3).

Milios, L., L. Holm Christensen, D. McKinnon, C. Christensen, M. K. Rasch and M. Hallstrøm Eriksen (2018). “Plastic recycling in the Nordics: A value chain market analysis.” Waste Management 76: 180-189.

Mont, O., K. Whalen and J. Nussholz (2019). Sustainable innovation in business models: celebrated but not interrogated. Sustainable Innovation. F. Boons and A. McMeekin, Routledge.

Neramballi, A., T. Sakao and J. Gero (2019). What Do Experienced Practitioners Discuss When Designing Product/Service Systems? Design Computing and Cognition ’18. J. Gero, Springer International Publishing: 361-380.

Nilsson, S. (2017). How requirements development could support design of effective and resource-efficient offerings Licentiate thesis, Linköping University Electronic Press.

Nilsson, S. and M. Lindahl (2016). “A Literature Review to Understand the Requirements Specification’s Role when Developing Integrated Product Service Offerings.” Procedia CIRP 47: 150-155.

Nilsson, S., E. Sundin and M. Lindahl (2018). “Integrated product service offerings – Challenges in setting requirements.” Journal of Cleaner Production 201: 879-887.

Nilsson, S., L. Buffoni, K. Sandahl, H. Johansson and B. Tahir Sheikh (2018). Empirical Study of Requirements Engineering in Cross Domain Development. DS 92: Proceedings of the DESIGN 2018 15th International Design Conference. D. Marjanović, M. Štorga, S. Škec, N. Bojčetić and N. Pavković. Dubrovnik, Croatia, ICED: 857-868.

Nussholz, J. (2017). “Circular business models: Defining a concept and framing an emerging research field.” Sustainability 9(10): 16 pages.

Nussholz, J. (2017). Circular Business Model Framework: Mapping value creation architectures along the product lifecycle. PLATE conference, 8-10 November. Delft University of Technology.

Nußholz, J. (2018). “A circular business model mapping tool for creating value from prolonged product lifetime and closed material loops.” Journal of Cleaner Production 197: 185-194.

Nußholz, J. L. K., F. Nygaard Rasmussen and L. Milios (2019). “Circular building materials: Carbon saving potential and the role of business model innovation and public policy.” Resources, Conservation and Recycling 141: 308-316.

Paulson, F. and E. Sundin (2015). Challenges and trends within eco-design. International conference on EcoDesign2015, Tokyo, December 2-4, 2015.

Pozo Arcos, B., A. R. Balkenende, C. A. Bakker and E. Sundin (2018). Product design for a circular economy – Functional recovery on focus. DESIGN 2018 – 15th International Design Conference: pp 2727-2738.

Päivärinne, S. and M. Lindahl (2016). “Combining Integrated Product and Service Offerings with Industrial Symbiosis – a study of opportunities and challenges.” Journal of Cleaner Production 127: 240-248.

Rondini, A., J. Matschewsky, G. Pezzotta and M. Bertoni (2018). “A simplified approach towards customer and provider value in PSS for small and medium-sized enterprises.” Procedia CIRP 73: 61-66.

Sakao, T. (2015). Eco-Co-design – Ecodesign with Communication, Cooperation, and Co-creation: A preliminary report. Global Cleaner Production & Sustainable Consumption Conference. Sitges, Barcelona, Spain.

Sakao, T. and E. Sundin (2015). Essence of remanufacturing derived from analysis of practices and theories. The 23rd International Conference on Production Research (ICPR23), Manila, Philippines, August 2-5, 2015.

Sakao, T. and E. Sundin (2018). “How to Improve Remanufacturing?—A Systematic Analysis of Practices and Theories.” Journal of Manufacturing Science and Engineering 141(2): 021004-021004-021013.

Sakao, T. and S. A. Brambila-Macias (2018). “Do we share an understanding of transdisciplinarity in environmental sustainability research?” Journal of Cleaner Production 170: 1399-1403.

Sakao, T., W. Song and J. Matschewsky (2017). “Creating service modules for customising product/service systems by extending DSM.” CIRP Annals 66(1): 21-24.

Shu, L. H., J. Duflou, C. Herrmann, T. Sakao, Y. Shimomura, Y. De Bock and J. Srivastava (2017). “Design for reduced resource consumption during the use phase of products.” CIRP Annals 66(2): 635-658.

Song, W. and T. Sakao (2016). “Service conflict identification and resolution for design of product–service offerings.” Computers & Industrial Engineering 98: 91-101.

Song, W. and T. Sakao (2017). “A customization-oriented framework for design of sustainable product/service system.” Journal of Cleaner Production 140: 1672-1685.

Song, W. and T. Sakao (2018). “An environmentally conscious PSS recommendation method based on users’ vague ratings: A rough multi-criteria approach.” Journal of Cleaner Production 172: 1592-1606.

Sundin, E. (2018). Circular Economy and design for remanufacturing. Designing for the Circular Economy. M. Charter, Routledge: 186-199.

Svensson, S., J. Richter, E. Maitre-Ekern, T. Pihlajarinne, A. Maigret and C. Dalhammar (2018). The emerging ‘Right to repair’ legislation in the EU and the US. Going Green Care Innovation. Vienna.

Wasserbaur, R. and T. Sakao (2018). Extending environmental impact assessments of consumer products with System Dynamics. The 36th International Conference of the System Dynamics Society, Reykjavík, Iceland, August 7-9, 2018.

Wei, S., O. Tang and E. Sundin (2015). “Core (product) Acquisition Management for remanufacturing: a review.” Journal of Remanufacturing 5(1): 4.

Whalen, K. (2017). Classifying circular business models: a practice-based review. PLATE: Product Lifetimes And The Environment. Volume 9: 417 – 421.

Whalen, K. (2017). Creation of a finance-focused circular economy serious game. PLATE conference 2017. Delft, The Netherlands.

Whalen, K. A. (2019). “Three circular business models that extend product value and their contribution to resource efficiency.” Journal of Cleaner Production 226: 1128-1137.

Whalen, K. A. and C. J. Whalen (2018). “The Circular Economy and Institutional Economics: Compatibility and Complementarity.” Journal of Economic Issues 52(3): 605-614.

Whalen, K. A., C. Berlin, J. Ekberg, I. Barletta and P. Hammersberg (2018). “‘All they do is win’: Lessons learned from use of a serious game for Circular Economy education.” Resources, Conservation and Recycling 135: 335-345.

Whalen, K. A., L. Milios and J. Nussholz (2018). “Bridging the gap: Barriers and potential for scaling reuse practices in the Swedish ICT sector.” Resources, Conservation and Recycling 135: 123-131.

Whalen, K. and J. Nussholz (2016). Building Extended Value Chains: Lessons from Swedish ICT Repair and Resale ‘Gap Exploiters’ for Original Equipment Manufacturers. Electronics Goes Green 2016+. Berlin, Germany, .

Widgren, M. and T. Sakao (2016). Unanswered questions in conceptual design towards Circular Economy. The 14th International Design Conference – (DESIGN 2016). Dubrovnik: pp. 571-578.

Wiesner, S., S. Nilsson and K.-D. Thoben (2017). “Integrating Requirements Engineering for Different Domains in System Development – Lessons Learnt from Industrial SME Cases.” Procedia CIRP 64: 351-356.

Willskytt, S. (2018). How can consumables be made more resource efficient? Environmental and resource assessment of measures, no L2018:100. Licentiate, Chalmers University of Technology.

Willskytt, S. and A.-M. Tillman (2019). “Resource efficiency of consumables – Life cycle assessment of incontinence products.” Resources, Conservation and Recycling 144: 13-23.

Willskytt, S., D. Böckin, H. André, M. Ljunggren Söderman and A. M. Tillman (2016). Framework for analysing resource‐efficient solutions. EcoBalance 2016. Kyoto, Japan.