Albertsen, L., J. L. Richter, P. Peck, C. Dalhammar and A. Plepys (2021). “Circular business models for electric vehicle lithium-ion batteries: An analysis of current practices of vehicle manufacturers and policies in the EU.” Resources, Conservation and Recycling 172: 105658.
André, H. (2018). Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products, . Licentiate, Chalmers University of Technology.
André, H. (2020). Assessing Mineral Resource Scarcity in a Circular Economy Context. PhD Doctoral thesis, Chalmers.
André, H. and M. Ljunggren (2021). “Towards comprehensive assessment of mineral resource availability? Complementary roles of life cycle, life cycle sustainability and criticality assessments.” Resources, Conservation and Recycling 167.
André, H., M. Ljunggren Söderman and A.-M. Tillman (2016). Circular Economy as a Means to Efficient Use of Scarce Metals? Electronics Goes Green 2016. Berlin, Germany.
André, H., M. L. Söderman and A. Nordelöf (2019). “Resource and environmental impacts of using second-hand laptop computers: A case study of commercial reuse.” Waste management 88: 268-279.
Bocken, N., L. Strupeit, K. Whalen and J. Nußholz (2019). “A Review and Evaluation of Circular Business Model Innovation Tools.” Sustainability 11(8): 2210.
Böckin, D. (2018). Learning from assessments of resource efficiency measures and their impact on resource use and the environment – Based on a case of additive manufacturing and a review of assessment studies, no L2018:101. Licentiate, Chalmers University of Technology.
Böckin, D., G. Goffetti, H. Baumann, A.-M. Tillman and T. Zobel (2020). Environmental assessment of two business models – a life cycle comparison between a sales and a rental business model in the apparel sector in Sweden Chalmers University of Technology.
Böckin, D. and A.-M. Tillman (2019). “Environmental assessment of additive manufacturing in the automotive industry.” Journal of Cleaner Production 226: 977-987.
Böckin, D., S. Willskytt, H. André, A.-M. Tillman and M. L. Söderman (2020). “How product characteristics can guide measures for resource efficiency—A synthesis of assessment studies.” Resources, Conservation and Recycling 154: 104582.
Böckin, D., S. Willskytt, A.-M. Tillman and M. Ljunggren Söderman (2016). What makes solutions within the manufacturing industry resource efficient? EcoBalance 2016, October 3-6. Kyoto, Japan.
Brambila-Macias, S. (2018). Early stages of designing resource-efficient offerings : An initial view of their analysis and evaluation. 1801 Licentiate thesis, comprehensive summary, Linköping University Electronic Press.
Brambila-Macias, S. (2020). Support for the conceptual design stage of effective and resource-efficient offerings : A pragmatic and cross-disciplinary approach. PhD Doctoral thesis, Linköping University.
Brambila-Macias, S. A., L. Dahllöf, K. Eriksson and T. Sakao (2017). Development of an environmental evaluation tool in the transport sector and its impact on decision-making in the early stages of design. 8th International Conference on Life Cycle Management. Luxemburg.
Brambila-Macias, S. A., M. Lindahl and T. Sakao (2018). Requirements for REES design support – A survey among large companies and SMEs Report from “Product and Service Design Support for REES” Project of Mistra REES program, LIU-IEI-RR–18/00304—SE.
Brambila-Macias, S. A., S. Nilsson, M. Widgren, M. Lindahl and T. Sakao (2017). State of the Art of Design Methods for Resource Efficient and Effective Solutions – Report from “Product and Service Design Methods for REES” Project of Mistra REES program, LIU-IEI-RR–17/00264—SE (two reports in one publication) 39 pages.
Brambila-Macias, S. A., S. Nilsson, M. Widgren, M. Lindahl and T. Sakao (2017). Support for Designing Resource Efficient and Effective Solutions: Current Use and Requirements by Swedish Industry – Report from “Product and Service Design Support for REES” Project of Mistra REES program. Linköping, Sweden, Linköping University, LIU-IEI-RR–17/00281—SE: 35 pages.
Brambila-Macias, S. A. and T. Sakao (2021). “Design Support Needs to Realize More Effective and Resource-Efficient Offerings: A Comparison Among Large Companies and Small and Medium Enterprises.” Frontiers in Sustainability 2(98).
Brambila-Macias, S. A. and T. Sakao (2021). “Effective ecodesign implementation with the support of a lifecycle engineer.” Journal of Cleaner Production 279: 123520.
Brambila-Macias, S. A., T. Sakao and C. Kowalkowski (2016). Interdisciplinary Insights Found for Product/Service System Design. 14th International Design Conference (DESIGN). Dubrovnik, Croatia, The Design Society: 137-144.
Brambila-Macias, S. A., T. Sakao and C. Kowalkowski (2018). “Bridging the gap between engineering design and marketing: insights for research and practice in product/service system design.” Design Science 4: e7.
Casper, R. and E. Sundin (2018). “Addressing Today’s challenges in automotive remanufacturing.” Journal of Remanufacturing 8(3): 93-102.
Casper, R. and E. Sundin (2018). “Reverse Logistic Transportation and Packaging Concepts in Automotive Remanufacturing.” Procedia Manufacturing 25: 154-160.
Crafoord, K., C. Dalhammar and L. Milios (2018). “The use of public procurement to incentivize longer lifetime and remanufacturing of computers.” Procedia CIRP 73: 137-141.
Dalhammar, C. (2015). “The Application of ‘life cycle thinking’ in European environmental law: theory and practice.” Journal for European Environmental & Planning Law 12(2): 97-127.
Dalhammar, C. (2015). “The Setting of Progressive Energy Efficiency Performance Standards for Products through the Ecodesign Directive.” Nordic Environmental Law Journal 2015(1): 21-41.
Dalhammar, C. (2016). “Industry attitudes towards ecodesign standards for improved resource efficiency.” Journal of Cleaner Production 123: 155-166.
Dalhammar, C. (2017). Rethinking the Ecodesign Policy Mix in Europe. Sustainability Through Innovation in Product Life Cycle Design. EcoProduction (Environmental Issues in Logistics and Manufacturing). M. Matsumoto, K. Masui, S. Fukushige and S. Kondoh, Springer, Singapore.
Dalhammar, C. (2020). “Sustainability, the Circular Economy and Consumer Law in Sweden.” Journal of European Consumer and Market Law 9(3): 4.
Dalhammar, C. and L. Milios (2016). Policies for a Circular Economy. Policy Brief, Mistra REES.
Dalhammar, C. and L. Milios (2016). Policies to support reconditioning and reuse of ICT. 2016 Electronics Goes Green 2016+ (EGG).
Dalhammar, C., L. Milios and J. L. Richter (2021). Ecodesign and the Circular Economy: Conflicting Policies in Europe. EcoDesign and Sustainability I: Products, Services, and Business Models. Y. Kishita, M. Matsumoto, M. Inoue and S. Fukushige. Singapore, Springer Singapore: 187-198.
Desai, A., M. Lindahl and M. Widgren (2017). Actors and System Maps: A Methodology for Developing Product/Service Systems. Sustainability Through Innovation in Product Life Cycle Design. EcoProduction (Environmental Issues in Logistics and Manufacturing). M. Matsumoto, K. Masui, S. Fukushige and S. Kondoh, Springer, Singapore.
Falconi, V., E. Sundin, M. Colledani and G. Copani (2017). Key success factors for implementing Upgrading Remanufacturing. 3rd International Conference on Remanufacturing (ICoR-17). Linköping, Sweden: pp 33-46.
Fargnoli, M., N. Haber and T. Sakao (2018). “PSS modularisation – a customer-driven integrated approach.” International Journal of Production Research: 1-17.
Fargnoli, M. and T. Sakao (2017). “Uncovering differences and similarities among quality function deployment-based methods in Design for X – Benchmarking in different domains.” Quality Engineering 29(4): 690-712.
Faure, M. G. and C. Dalhammar (2018). Principles for the Design of a Policy Framework to Address Product Life Cycle Impacts. Preventing Environmental Damage from Products: An Analysis of the Policy and Regulatory Framework in Europe. C. Dalhammar, E. Maitre-Ekern and H. C. Bugge. Cambridge, Cambridge University Press: 57-86.
Gåvertsson, I., L. Milios and C. Dalhammar (2018). “Quality Labelling for Re-used ICT Equipment to Support Consumer Choice in the Circular Economy.” Journal of Consumer Policy.
Haber, N., M. Fargnoli and T. Sakao (2018). “Integrating QFD for product-service systems with the Kano model and fuzzy AHP.” Total Quality Management & Business Excellence: 1-26.
Hjelm, O. and M. Lindahl (2016). “Roles of Academia in Supporting Eco-design in Small Companies for Better Environmental and Economic Performance.” Procedia CIRP 50: 745-750.
Jerome, A., H. Helander, M. Ljunggren and M. Janssen (2022). “Mapping and testing circular economy product-level indicators: A critical review.” Resources, Conservation and Recycling 178: 106080.
Johnson, E. and A. Plepys (2021). “Product-Service Systems and Sustainability: Analysing the Environmental Impacts of Rental Clothing.” Sustainability 13(4): 2118.
Kimita, K., J. Matschewsky and T. Sakao (2021). “A Method for Remanufacturing Process Planning and Control Using Loosely Coupled Systems.” Journal of Manufacturing Science and Engineering 143(10).
Kimita, K., S. A. Brambila-Macias, A.-M. Tillman and T. Sakao (2020). “Failure analysis method for enhancing circularity through systems perspective.” Journal of Industrial Ecology n/a(n/a).
Kimita, K., T. Sakao and Y. Shimomura: (2018). “A Failure Analysis Method for Highly-Reliable Product-Service System Design.” Research in Engineering Design, Springer 29(2): pp 143–160.
Kurilova-Palisaitiene, J. (2015). Lean Remanufacturing: addressing system challenges. Eco-Design-15, December 2-4, Tokyo, Japan.
Kurilova-Palisaitiene, J. and E. Sundin (2017). Remanufacturing lead time reduction through a Just-in-time Lean strategy – a case study on Laptops. 3rd International Conference on Remanufacturing (ICoR-17). Linköping, Sweden: pp 47-56.
Kurilova-Palisaitiene, J., E. Sundin and B. Poksinska (2018). “Remanufacturing challenges and possible lean improvements.” Journal of Cleaner Production 172: 3225-3236.
Lindahl, M. (2018). Key issues when designing solutions for a circular economy. Designing for the Circular Economy. M. Charter, Routledge: 113-122.
Lindkvist Haziri, L. and E. Sundin (2020). “Supporting design for remanufacturing – A framework for implementing information feedback from remanufacturing to product design.” Journal of Remanufacturing 10(1): 57-76.
Lindkvist Haziri, L., E. Sundin and T. Sakao (2019). “Feedback from Remanufacturing: Its Unexploited Potential to Improve Future Product Design.” Sustainability 11.
Lindkvist, L., N. Alonso Movilla, E. Sundin and P. Zwolinski (2016). Investigating types of information from WEEE take-back systems in order to promote Design for Recovery. EcoDesign 2015, 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, 2-4 December 2015. Matsumoto, M. , K. Masui, S. Fukushige and S. Kondoh, Springer.
Lindkvist, L. and E. Sundin (2015). Assessing barriers for available life-cycle information feedback transfer to product design. ICoR- 2nd International Conference on Remanufacturing, Amsterdam, Netherlands, 14-16 June 2015.
Lindkvist, L. and E. Sundin (2016). A stepwise method towards products adapted for remanufacturing. INTERNATIONAL DESIGN CONFERENCE – DESIGN 2016, Dubrovnik – Croatia, May 16 – 19, 2016. S. M. P. N. B. N. S. S. Marjanovic Dorian, The Design Society: 321-330.
Ljunggren Söderman, M. and H. André (2019). “Effects of circular measures on scarce metals in complex products – Case studies of electrical and electronic equipment.” Resources, Conservation and Recycling 151: 104464.
López, A. M., F. Musonda, T. Sakao and N. Kebir (2017). “Lessons Learnt from Designing PSS for Base of Pyramid.” Procedia CIRP 61: 623-628.
Maitre-Ekern, E. and C. Dalhammar (2018). Consumers in the Circular Economy: A Scandinavian Perspective. Consumer Protection in a Circular Economy. Leuven.
Maitre‐Ekern, E. and C. Dalhammar (2016). “Regulating Planned Obsolescence – A Review of Legal Approaches to Increase Product Durability and Reparability in Europe.” Review of European, Comparative & International Environmental Law 25(3): 378-394.
Matschewsky, J. (2016). What’s in it for the Provider? : A Lifecycle-Focused Approach towards Designing for Value in Product-Service Systems. 1757 Licentiate thesis, Linköping University Electronic Press.
Matschewsky, J., M. L. Kambanou and T. Sakao (2018). “Designing and providing integrated product-service systems – challenges, opportunities and solutions resulting from prescriptive approaches in two industrial companies.” International Journal of Production Research 56(6): 2150-2168.
Milios, L. (2016). Policies for Resource Efficient and Effective Solutions – A review of concepts, current policy landscape and future policy considerations for the transition to a Circular Economy. Lund, Report: Lund University & Mistra REES.
Milios, L. (2017). The ‘circular’building materials challenge: a case-based policy approach. 18th European Roundtable on Sustainable Consumption and Production.
Milios, L. (2018). “Advancing to a Circular Economy: three essential ingredients for a comprehensive policy mix.” Sustainability Science 13(3): 861-878.
Milios, L. (2020). Policy Framework for Material Resource Efficiency : Pathway Towards a Circular Economy. PhD Doctoral thesis, Lund University.
Milios, L. (2021). “Towards a Circular Economy Taxation Framework: Expectations and Challenges of Implementation.” Circular Economy and Sustainability.
Milios, L. (2021). “Overarching policy framework for product life extension in a circular economy—A bottom-up business perspective.” Environmental Policy and Governance n/a(n/a).
Milios, L. and C. Dalhammar (2020). “Ascending the Waste Hierarchy: Re-use potential in Swedish recycling centres.” Detritus(9): 27.
Milios, L., A. E. Davani and Y. Yu (2018). “Sustainability Impact Assessment of Increased Plastic Recycling and Future Pathways of Plastic Waste Management in Sweden.” Recycling 3(3).
Milios, L., L. Holm Christensen, D. McKinnon, C. Christensen, M. K. Rasch and M. Hallstrøm Eriksen (2018). “Plastic recycling in the Nordics: A value chain market analysis.” Waste Management 76: 180-189.
Milios, L. and M. Matsumoto (2019). “Consumer Perception of Remanufactured Automotive Parts and Policy Implications for Transitioning to a Circular Economy in Sweden.” Sustainability 11(22): 6264.
Milios, L. and K. Whalen (2018). Sailing towards a circular economy: potential for increased reuse and remanufacturing of ship components. 2018 International Conference on Resource Sustainability. Beijing.
Mont, O., A. Plepys, K. Whalen and J. Nußholz (2017). Business Brief – Business Models for Circular Economy. Linköping, Sweden, Mistra REES, Linköping University: 4.
Mont, O., A. Plepys, K. Whalen and J. Nußholz (2017). Business model innovation for a circular economy – drivers and barriers for the Swedish industry–the voice of REES companies. Lund, Sweden, Mistra REES, IIIEE, Lund University: 20.
Mont, O., K. Whalen and J. Nussholz (2019). Sustainable innovation in business models: celebrated but not interrogated. Sustainable Innovation. F. Boons and A. McMeekin, Routledge.
Neramballi, A. (2020). Understanding and Supporting Product-Service System Designing : Preliminary Insights and Support for Designing Resource-Efficient and Effective Solutions. Licentiate Linköping University.
Neramballi, A., T. Sakao and J. Gero (2019). What Do Experienced Practitioners Discuss When Designing Product/Service Systems? Design Computing and Cognition ’18. J. Gero, Springer International Publishing: 361-380.
Neramballi, A., T. Sakao and J. S. Gero (2019). Effects of a design support on practitioners designing a Product/Service System – a case study. The 2nd SIG conference in Human Behaviour in Design. Tutzing, Germany, Institut für Technische Produktentwicklung, Universität der Bundeswehr München: 11-22
Neramballi, A., T. Sakao, S. Willskytt and A.-M. Tillman (2020). “A design navigator to guide the transition towards environmentally benign product/service systems based on LCA results.” Journal of Cleaner Production 277.
Nilsson, S. (2017). How requirements development could support design of effective and resource-efficient offerings Licentiate thesis, Linköping University Electronic Press.
Nilsson, S., L. Buffoni, K. Sandahl, H. Johansson and B. Tahir Sheikh (2018). Empirical Study of Requirements Engineering in Cross Domain Development. DS 92: Proceedings of the DESIGN 2018 15th International Design Conference. D. Marjanović, M. Štorga, S. Škec, N. Bojčetić and N. Pavković. Dubrovnik, Croatia, ICED: 857-868.
Nilsson, S. and M. Lindahl (2016). “A Literature Review to Understand the Requirements Specification’s Role when Developing Integrated Product Service Offerings.” Procedia CIRP 47: 150-155.
Nilsson, S., E. Sundin and M. Lindahl (2018). “Integrated product service offerings – Challenges in setting requirements.” Journal of Cleaner Production 201: 879-887.
Nußholz, J. (2018). “A circular business model mapping tool for creating value from prolonged product lifetime and closed material loops.” Journal of Cleaner Production 197: 185-194.
Nussholz, J. (2017). Circular Business Model Framework: Mapping value creation architectures along the product lifecycle. PLATE conference, 8-10 November. Delft University of Technology.
Nussholz, J. (2017). “Circular business models: Defining a concept and framing an emerging research field.” Sustainability 9(10): 16 pages.
Nußholz, J. L. K. (2020). Circular Business Model Design : Business Opportunities from Retaining Value of Products and Materials. PhD Doctoral thesis, Lund University.
Nußholz, J. L. K., F. Nygaard Rasmussen and L. Milios (2019). “Circular building materials: Carbon saving potential and the role of business model innovation and public policy.” Resources, Conservation and Recycling 141: 308-316.
Päivärinne, S. and M. Lindahl (2016). “Combining Integrated Product and Service Offerings with Industrial Symbiosis – a study of opportunities and challenges.” Journal of Cleaner Production 127: 240-248.
Paulson, F. and E. Sundin (2015). Challenges and trends within eco-design. International conference on EcoDesign2015, Tokyo, December 2-4, 2015.
Pozo Arcos, B., A. R. Balkenende, C. A. Bakker and E. Sundin (2018). Product design for a circular economy – Functional recovery on focus. DESIGN 2018 – 15th International Design Conference: pp 2727-2738.
Rondini, A., J. Matschewsky, G. Pezzotta and M. Bertoni (2018). “A simplified approach towards customer and provider value in PSS for small and medium-sized enterprises.” Procedia CIRP 73: 61-66.
Sakao, T. (2015). Eco-Co-design – Ecodesign with Communication, Cooperation, and Co-creation: A preliminary report. Global Cleaner Production & Sustainable Consumption Conference. Sitges, Barcelona, Spain.
Sakao, T. and K. Kimita (2021). “Design research towards a circular economy: focusing on product/service systems and remanufacturing.” Design Engineering 56(4): 153-165.
Sakao, T. and S. A. Brambila-Macias (2018). “Do we share an understanding of transdisciplinarity in environmental sustainability research?” Journal of Cleaner Production 170: 1399-1403.
Sakao, T., J. Gero and H. Mizuyama (2020). “Analyzing cognitive processes of a product/service-system design session using protocol analysis.” Artificial Intelligence for Engineering Design, Analysis and Manufacturing 34(4): 515-530.
Sakao, T., Y. Liu and A. Neramballi (2019). Enhancing PSS design through big data, IoT and bigdata analytics. Spring Servitization Conference 2019.
Sakao, T. and A. Neramballi (2020). “A Product/Service System Design Schema: Application to Big Data Analytics.” Sustainability 12(8).
Sakao, T., W. Song and J. Matschewsky (2017). “Creating service modules for customising product/service systems by extending DSM.” CIRP Annals 66(1): 21-24.
Sakao, T. and E. Sundin (2015). Essence of remanufacturing derived from analysis of practices and theories. The 23rd International Conference on Production Research (ICPR23), Manila, Philippines, August 2-5, 2015.
Sakao, T. and E. Sundin (2018). “How to Improve Remanufacturing?—A Systematic Analysis of Practices and Theories.” Journal of Manufacturing Science and Engineering 141(2): 021004-021004-021013.
Shu, L. H., J. Duflou, C. Herrmann, T. Sakao, Y. Shimomura, Y. De Bock and J. Srivastava (2017). “Design for reduced resource consumption during the use phase of products.” CIRP Annals 66(2): 635-658.
Song, W. and T. Sakao (2016). “Service conflict identification and resolution for design of product–service offerings.” Computers & Industrial Engineering 98: 91-101.
Song, W. and T. Sakao (2017). “A customization-oriented framework for design of sustainable product/service system.” Journal of Cleaner Production 140: 1672-1685.
Song, W. and T. Sakao (2018). “An environmentally conscious PSS recommendation method based on users’ vague ratings: A rough multi-criteria approach.” Journal of Cleaner Production 172: 1592-1606.
Subramoniam, R., E. Sundin, S. Subramoniam and D. Huisingh (2021). “Riding the Digital Product Life Cycle Waves towards a Circular Economy.” Sustainability 13(16): 8960.
Sundin, E. (2018). Circular Economy and design for remanufacturing. Designing for the Circular Economy. M. Charter, Routledge: 186-199.
Svensson, S., J. Richter, E. Maitre-Ekern, T. Pihlajarinne, A. Maigret and C. Dalhammar (2018). The emerging ‘Right to repair’ legislation in the EU and the US. Going Green Care Innovation. Vienna.
Tillman, A.-M., S. Willskytt, D. Böckin, H. André and M. Ljunggren Söderman (2020). What circular economy measures fit what kind of product? . The Handbook on the Circular Economy. M. Brandão, D. Lazaveric and G. Finnveden, Edward Elgar Publishing Ltd: 327-242
Wasserbaur, R. (2020). Simulation Modelling of a Shift to Service-Based Offerings : Resource efficiency and operational implications in the context of the circular economy. PhD Doctoral thesis, Linköping University.
Wasserbaur, R. and T. Sakao (2018). Extending environmental impact assessments of consumer products with System Dynamics. The 36th International Conference of the System Dynamics Society, Reykjavík, Iceland, August 7-9, 2018.
Wasserbaur, R. and T. Sakao (2020). “Conceptualising Design Fixation and Design Limitation and Quantifying Their Impacts on Resource Use and Carbon Emissions.” Sustainability 12(19): 8104.
Wasserbaur, R., T. Sakao, M. Ljunggren Söderman, A. Plepys and C. Dalhammar (2020). “What if everyone becomes a sharer? A quantification of the environmental impact of access-based consumption for household laundry activities.” Resources, Conservation and Recycling 158.
Wei, S., O. Tang and E. Sundin (2015). “Core (product) Acquisition Management for remanufacturing: a review.” Journal of Remanufacturing 5(1): 4.
Whalen, K. (2017). Classifying circular business models: a practice-based review. PLATE: Product Lifetimes And The Environment. Volume 9: 417 – 421.
Whalen, K. (2017). Creation of a finance-focused circular economy serious game. PLATE conference 2017. Delft, The Netherlands.
Whalen, K. and J. Nussholz (2016). Building Extended Value Chains: Lessons from Swedish ICT Repair and Resale ‘Gap Exploiters’ for Original Equipment Manufacturers. Electronics Goes Green 2016+. Berlin, Germany, .
Whalen, K. A. (2019). “Three circular business models that extend product value and their contribution to resource efficiency.” Journal of Cleaner Production 226: 1128-1137.
Whalen, K. A., C. Berlin, J. Ekberg, I. Barletta and P. Hammersberg (2018). “‘All they do is win’: Lessons learned from use of a serious game for Circular Economy education.” Resources, Conservation and Recycling 135: 335-345.
Whalen, K. A., L. Milios and J. Nussholz (2018). “Bridging the gap: Barriers and potential for scaling reuse practices in the Swedish ICT sector.” Resources, Conservation and Recycling 135: 123-131.
Whalen, K. A. and C. J. Whalen (2018). “The Circular Economy and Institutional Economics: Compatibility and Complementarity.” Journal of Economic Issues 52(3): 605-614.
Widgren, M. and T. Sakao (2016). Unanswered questions in conceptual design towards Circular Economy. The 14th International Design Conference – (DESIGN 2016). Dubrovnik: pp. 571-578.
Wiesner, S., S. Nilsson and K.-D. Thoben (2017). “Integrating Requirements Engineering for Different Domains in System Development – Lessons Learnt from Industrial SME Cases.” Procedia CIRP 64: 351-356.
Willskytt, S. (2018). How can consumables be made more resource efficient? Environmental and resource assessment of measures, no L2018:100. Licentiate, Chalmers University of Technology.
Willskytt, S. (2020). Resource efficient products in a circular economy – The case of consumables. From environmental and resource assessment to design guidelines PhD Doctoral thesis, Chalmers.
Willskytt, S. (2021). “Design of Consumables in a Resource-Efficient Economy—A Literature Review.” Sustainability 13(3): 1036.
Willskytt, S., D. Böckin, H. André, M. Ljunggren Söderman and A. M. Tillman (2016). Framework for analysing resource‐efficient solutions. EcoBalance 2016. Kyoto, Japan.
Willskytt, S. and S. A. Brambila-Macias (2020). “Design Guidelines Developed from Environmental Assessments: A Design Tool for Resource-Efficient Products.” Sustainability 12(12): 4953.
Willskytt, S. and A.-M. Tillman (2019). “Resource efficiency of consumables – Life cycle assessment of incontinence products.” Resources, Conservation and Recycling 144: 13-23.